- 3rd Kumbharwada Lane, Mumbai, Maharashtra
- GST NO. : 27ANTPD1447J1ZQ
- +91-9920323585, +91-9828016166
Other Products
Leading Manufacturers, Exporters and Wholesaler of Blind Flange, Check Nuts, Dome Nuts, Duplex Steel Bar, Duplex Steel Pipe, Duplex Steel Plate, EN-19 Steel Rod, EN-24 Steel Rod, EN-8 Steel Rod, EN-9 Carbon Steel Rod, Glass Valve Flange, Grooved Flange, Hex Nuts, Hydraulic Cylinder Pipe, Lap Joint Flange, Puddle Flange, Reducing Flange, Ring Type Joint Flange, Screwed Flange, Slip On Flange, Socket Weld Flange, SORF Flange, Spectacle Flange, Weld Neck Flange and Wing Nuts from Mumbai.
| Business Type | Manufacturer, Exporter, Supplier |
| Size | 0-1 Inch, >30 Inch |
| material standard | ASTM A105, ANSI B16.5 |
| Material | Steel |
| Color | Silver |
| Shape | Round |
| Brand | Shree Vinayak Metal & Tube |
Preferred Buyer From
| Location | Worldwide |
Nickel & Copper Alloy:
Nickel Alloy
- ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ), UNS 4400 (MONEL 400 ), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276)
- ASTM / ASME SB 160 UNS 2201 (NICKEL 201)
- ASTM / ASME SB 472 UNS 8020 (ALLOY 20 / 20 CB 3)
Copper Alloy:
- ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600. ASTM / ASME SB 151 UNS NO. 70600, 71500, C 70600 ( CU -NI- 90/10), C 71500 ( CU -NI- 70/30)
- ASTM / ASME SB 152 UNS NO C 10100, C 10200, C 10300, C 10800 , C 12000, C 12200.
Stainless & Duplex Steel:
Stainless Steel
ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310H, 316, 316H , 316L, 316 LN, 317, 317L, 321, 321H, 347, 347 H
Duplex Steel
ASTM / ASME SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61.
Carbon & Alloy Steel:
Carbon Steel
ASTM / ASME A 105. ASTM / ASME A 350 LF 2.
Alloy Steel
ASTM / ASME A 182 GR F 5, F 9, F 11, F 12, F 22, F 91.
Features:
- Withstand considerable pressure
- Good quality plastic
| Business Type | Manufacturer, Exporter, Supplier |
| Size | 2 Inch |
| Type | Check Nut |
| Material | Mild Steel |
| Color | Silver |
| Usage/Application | Industrial |
| Finishing | Polished |
Preferred Buyer From
| Location | Worldwide |
| Business Type | Manufacturer, Exporter, Supplier |
| Material | Steel |
| Application | Industrial Use |
| Color | Silver |
| Standard | Din |
| Shape | Dome |
| Finishing | Polished |
Preferred Buyer From
| Location | Worldwide |
Stainless Steel :
AISI 302, 304, 304L,316, 316L, 310, 317, 317L, 321, 347, 410, 420,904L etc.
Duplex & Super Duplex Steel :
ASTM / ASME A815 UNS No. S31803, UNS No. S 32205, UNS No. S 31254, UNS No. S 31550, UNS No. S 32750, and UNS No. S 32760
Carbon Steel :
ASTM A307
Alloy Steel :
ASTM / ASME A/SA 193 / 194 B 6, B 7/ B 7M, B 16, 2, 2HM, 2H, GR 6, B 7, B 7M
Nickel Alloy :
ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472 UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201), UNS 4400 (MONEL 400), UNS 8825 (INCONEL 825), UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 8020 (ALLOY 20 / 20 CB 3)
| Business Type | Manufacturer, Exporter, Supplier |
| Material | Steel |
| Shape | Round |
| Application | Construction |
| Single Piece Length | 3 – 30 Meter |
| Thickness/Diameter | 3-4 inch |
Preferred Buyer From
| Location | Worldwide |
| Business Type | Manufacturer, Exporter, Supplier |
| Material | UNS S 32205 AND UNS S 31803 |
| Steel Grade | UNS S 32205 AND UNS S 31803 |
| Size | 1/2″ – 60″ |
| Type | Seamless, Welded, EFW |
| Thickness | As Per Clients Requirement |
| Surface Finishing | Annealed And Pickled |
| Unit Pipe Length | As Per Clients Requirement |
| Brand Name | Shree Vinayak Metal & Tubes |
| Unit Length | 4-7 Mtrs. |
| Surface Treatment | Annealed and Pickled |
| Form | Round, Rectangular, Square |
| End Connection | Plain End, Beveled End, Threaded |
| Grade | UNS S32205 AND UNS S31803 |
| Wall Thickness | 1mm to 50mm Available |
Preferred Buyer From
| Location | Worldwide |
| Business Type | Manufacturer, Exporter, Supplier |
| Material | Stainless Steel |
| Thickness | 1-2 Mm |
| Length | Multisizes |
| Application | Industrial |
| Color | Silver |
| Surface Treatment | Polished |
Preferred Buyer From
| Location | Worldwide |
| Business Type | Manufacturer, Exporter, Supplier |
| Material | Alloy Steel EN 19 Round Bar |
| Material Grade | EN19 Alloy Steel Bar |
| Single Piece Length | 6 Meter |
| Usage/Application | Industrial |
| Shape | Round |
| Size | Dia 16 – Dia 200 mm |
| Surface Finish | Bright & Black |
Preferred Buyer From
| Location | Worldwide |
| Business Type | Manufacturer, Exporter, Supplier |
| Material | Steel |
| Feature | High Quality |
| Usage/Application | Industrial |
| Shape | Round |
| Steel Grade | EN24 |
| Diameter | Upto 5 Inch |
Preferred Buyer From
| Location | Worldwide |
| Business Type | Manufacturer, Exporter, Supplier |
| Material | Steel |
| Shape | Round |
| Application | Automobile Industry, Construction, Oil & Gas Industry, Pharmaceutical / Chemical Industry |
| Usage/Application | Construction |
| Features | High Quality |
Preferred Buyer From
| Location | Worldwide |
- EN8 also know as 080M40. Unalloyed medium carbon steel. EN8 is a medium strength steel, good tensile strength. Suitable for shafts, stressed pins, studs, keys etc. AISI 1040.
- Available as normalized or rolled. EN8 is supplied as round drawn/turned, round hot rolled, hexagon, square, flats and plate.
- EN8 is usually supplied untreated but can be supplied to order in the normalized or finally heat treated (quenched and tempered to ”Q” or “R”properties for limiting ruling sections up to 63mm), which is adequate for a wide range of applications. Please refer to our selection guide for comparisons.
- EN8 is a very popular grade of through-hardening medium carbon steel, which is readily machinable in any condition. (Refer to our machinability guide). EN8 is suitable for the manufacture of parts such as general-purpose axles and shafts, gears, bolts and studs. It can be further surface-hardened typically to 50-55 HRC by induction processes, producing components with enhanced wear resistance. For such applications the use of EN8D (080A42) is advisable. It is also available in a free-machining version, EN8M (212A42)
- EN8 in its heat treated forms possesses good homogenous metallurgical structures, giving consistent machining properties.
- Good heat treatment results on sections larger than 63mm may still be achievable, but it should be noted that a fall-off in mechanical properties would be apparent approaching the centre of the bar.
- It is therefore recommended that larger sizes of EN8 are supplied in the untreated condition, and that any heat treatment is carried out after initial stock removal. This should achieve better mechanical properties towards the core.
Heat Treatment
- EN8 or 080m40 can be tempered at a heat of between 550°C to 660°C (1022°F-1220°F), heating for about 1 hour for every inch of thickness, then cool in oil or water.
- Normalizing of EN8 bright mild steel takes place at 830-860°C (1526°F-1580°F) then it is cooled in air.
- Quenching in oil or water after heating to this temperature will harden the steel.
- Chemical Composition of EN8 Steel
| Business Type | Manufacturer, Exporter, Supplier |
| Material | Carbon Steel |
| Shape | Hexagonal (A/F) |
| Thickness | 2-3 Inch |
| Application | Construction, Etc. |
| Material Grade | EN 9 |
| Single Piece Length | 3mtr, 6mtr, 18mtr |
| Surface Finish | Black Bar , Bright Bar |
Preferred Buyer From
| Location | Worldwide |
Our range of carbon and stainless steel includes the following:
- Tool steels & die steels (high speed steel , hot die steel , hchcr , ohns , 1% carbon)
- Alloy steels (en series & aisi series steels)
- Stainless steels (ss 202 , ss 303 , ss 304/304l , ss 316/316l , ss 310 , duplex)
- Non ferrous metals (brass , copper , phosphor bronze)
- Aluminum (1050 , 1100 , 2011 , 2014 , 2017 , 3003 , 5051 , 6061 , 6063 , 6351 , 7039 , 7075 grades)
- Specialty metals (nickel alloys, titanium, hastalloy, monal and inconal)
- High manganese steel plates
- Case hardening steels (16/20mncr5, sae 8620, 15crmo3, 15crni6 and 18crni8)
- carbon steels (c 45, c 50, c 55, c 60, c 65, c 70, c 75 and c 80)
- Spring steels (en 9, en 42j, en 45, en 47 and en 48a)
- Free cutting steels (en 1a, en 8m and en 15)
- Boron steels (all grades)
- Boiler quality plates (sa 515/516gr60-70, dsq, sail ma, and en10025 and is: 2062)
- Steel pipes/ tubes (carbon steel, alloy steel and stainless steel)
- Flange (f 5 / f 11 / f 12 & f 22 grades)
- Gear blanks and shaftings (carbon and alloy steel grades)
- Profile cutting (carbon & alloy steel plate cuttings)
- Bhel specn steels (standard grades in bhel specn steels)
| Business Type | Manufacturer, Exporter, Supplier |
| Material | SS 304,SS 316,SS 304L, SS 316 L, Duplex Stainless Steel |
| Color | Clear White-Transparent |
| Usage | Industrial |
| Type | Tri-Clover Full View |
| Usage/Application | Bulk Drugs, Pharma, Food and Brewerages |
| Brand Name | Shree Vinayak Metal & Tube |
| Connections | Triclover Ends |
| Size | 1/2 to 6 Inch |
Preferred Buyer From
| Location | Worldwide |
| Business Type | Manufacturer, Exporter, Supplier |
| Size | 2 Inch |
| Material | DI |
| Usage | Water Pipe |
| End Connection Type | Grooved |
| Nominal Size | 2 Inch |
Preferred Buyer From
| Location | Worldwide |
Stainless Steel Tongue and Groove Flange:
ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Duplex & Super Duplex Steel Groove and Tongue Flange :
ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61
Carbon Steel Tongue and Groove Flange:
ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706
Low Temperature Carbon Steel Groove and Tongue Flange: ASTM A350, LF2, LF3
Alloy Steel Groove and Tongue Flange:
ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91
Copper Alloy Steel Tongue and Groove Flange : ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200
Nickel Alloy Groove and Tongue Flange:
ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020)
| Business Type | Manufacturer, Exporter, Supplier |
| Material | Stainless Steel |
| Length | 3 Mm To 200 Mm |
| Tolerance | +/-0.01mm To +/-0.05mm |
| British Standards | BS 57 |
| Finish | Per ASTM A380/A380M |
| UTS – Unified Thread Standard | UNC, UNF, UNEF, UNS, NPT, NPTF |
Preferred Buyer From
| Location | Worldwide |
| Business Type | Manufacturer, Exporter, Supplier |
| Material | Steel |
| Color | Black |
| Thickness (mm) | Customized |
| Unit Length | 3m, 6m, 12m |
| Size | 1/2 inch, 1 inch, 2 inch |
| Material Grade | A 106 / A 53 / BS 3059 / T11 |
| Steel Grade | Industrial |
Preferred Buyer From
| Location | Worldwide |
Heat treatment methods applied in the boiler pipes:
- Quenching
- Tempering
- Annealing
| Business Type | Manufacturer, Exporter, Supplier |
| Shape | Round |
| Material | Stainless Steel |
| Size | 1/2 to 48 Inch (As Per Customer Requirement) |
| Material Standard | ASTM A105 |
| Surface Treatment | Polished |
| Class | 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6, 10, 16, 25, 40 Etc |
Preferred Buyer From
| Location | Worldwide |
Lap Joint flanges have certain special advantages over other flanges. These are as follows:
- Lap Joint flanges have the freedom to swivel around the pipe. This facilitates the lining up of opposing flange bolt holes.
- Lack of contact with the fluid inside the pipe leads to the greater durability of these flanges.
- In piping systems which corrode or erode quickly, the lap joint flanges may be salvaged for re-use.
- The pressure-holding capacity of lap joint flanges is little. But it is better than that of slip-on flanges.
- The Lap Joint works as a backing ring on the stub.
- The main advantage of lap joint flange is that the bolt holes can be aligned with the matching flange after the welds have been completed.
- They allow rotational alignment capability.
Value Added Services:
- Hot Dip Galvanizing
- Electro Polish
- Test Certificate As Per EN 10204 – 3.1 & 3.2
| Business Type | Manufacturer, Exporter, Supplier |
| Material | Steel |
| Shape | Round |
| Technics | Casting |
| Usage | Industry Use |
| Finishing | Non Polished, Mill Finish |
| Packaging Type | Shrink Wrapping |
Preferred Buyer From
| Location | Worldwide |
| Business Type | Manufacturer, Exporter, Supplier |
| Shape | Round |
| Material | Stainless Steel |
| Technics | Forged |
| Size | 5-10 inch |
| Material Standard | ANSI B16.5 |
| Material Grade | DIN 1.4539 |
Preferred Buyer From
| Location | Worldwide |
Size : 1/2″ (15 NB) to 48″ (1200NB)
Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
- DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629,
- DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673
- BS : BS4504 , BS4504, BS1560, BS10
Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Material & Grades of Reducing Flanges
Stainless Steel Reducing Flanges :
ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Duplex & Super Duplex Steel Reducing Flanges :
ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61
Carbon Steel Reducing Flanges :
ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706
Low Temperature Carbon Steel Reducing Flanges : ASTM A350, LF2, LF3
Alloy Steel Reducing Flanges :
ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91
Copper Alloy Steel Reducing Flanges :
- ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C
- 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200
Nickel Alloy Reducing Flanges :
- ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS
- No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel
- 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No.
- N10276), Alloy 20 (UNS No. N08020)
Features:
- Durable
- Corrosion resistance.
- High strength.
- Dimensional accuracy.
- Quality assured
- Sleek design
- Safe to use
| Business Type | Manufacturer, Exporter, Supplier |
| Shape | Oval |
| Material | Steel |
| Flange Type | Weld Neck |
| Specialities | Strong Construction, Fine Quality, Durable |
| Finishing | Polished |
Preferred Buyer From
| Location | Worldwide |
Dimensions : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Size : 1/2″ (15 NB) to 48″ (1200NB)
Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
- DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629,
- DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673
- BS : BS4504 , BS4504, BS1560, BS10
Flange Face Type : Flat Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Material & Grades of Ring Type Joint Flanges (RTJ)
Stainless Steel Ring Type Joint Flanges :
ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Duplex & Super Duplex Steel Ring Type Joint Flanges :
ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61
Carbon Steel Ring Type Joint Flanges :
ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706
Low Temperature Carbon Steel Ring Type Joint Flanges : ASTM A350, LF2, LF3
Alloy Steel Ring Type Joint Flanges :
ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91
Copper Alloy Steel Ring Type Joint Flanges :
ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200
ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS
No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel
600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No.
N10276), Alloy 20 (UNS No. N08020)
| Business Type | Manufacturer, Exporter, Supplier |
| Size | 1/8-48 Inch (As Per Customer Requirement) |
| Type | Screwed Flanges |
| Material | Carbon Steel |
| Application | Industrial Use |
| Surface Treatment | Polished |
| Class | 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6,10, 16, 25, 40 Etc. |
Preferred Buyer From
| Location | Worldwide |
Dimensions : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Size : 1/2″ (15 NB) to 48″ (1200NB)
Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
- DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629,
- DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673
- BS : BS4504 , BS4504, BS1560, BS10
Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Material & Grades of Threaded / Screwed Flanges :
Stainless Steel Threaded / Screwed Flanges :
ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Duplex & Super Duplex Steel Threaded / Screwed Flanges :
ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61
Carbon Steel Threaded / Screwed Flanges :
ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706
Low Temperature Carbon Steel Threaded / Screwed Flanges : ASTM A350, LF2, LF3
Alloy Steel Threaded / Screwed Flanges :
ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91
Copper Alloy Steel Threaded / Screwed Flanges :
- ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni
- 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200
Nickel Alloy Threaded / Screwed Flanges :
- ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS
- No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel
- 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No.
- N10276), Alloy 20 (UNS No. N08020)
| Business Type | Manufacturer, Exporter, Supplier |
| Shape | Round |
| Material | Alloy Steel |
| Size | 1/2 to 60 Inch (As Per Customer Requirement) |
| Packing Type | Box |
| Surface Treatment | Polished |
| Class | 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6,10, 16, 25, 40 Etc. |
| No of Holes | 8 |
Preferred Buyer From
| Location | Worldwide |
| Business Type | Manufacturer, Exporter, Supplier |
| Material | Stainless Steel |
| Shape | Round |
| Application | Industrial Fitting |
| Color | Silver |
| BS | BS4504 , BS4504, BS1560, BS10 |
| Flange Face Type | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
Preferred Buyer From
| Location | Worldwide |
- Dimensions : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
- Size : 1/2″ (15 NB) to 48″ (1200NB)
- Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
- DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629,
- DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673
- BS : BS4504 , BS4504, BS1560, BS10
- Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
| Business Type | Manufacturer, Exporter, Supplier |
| Shape | Round |
| Color | Silver |
| Finishing | Polished |
| Usage | Industry Use |
| Feature | Rust Proof, Perfect Shape |
| Packaging Type | Carton |
Preferred Buyer From
| Location | Worldwide |
| Business Type | Manufacturer, Exporter, Supplier |
| Size | >30 Inch |
| Material | Stainless Steel |
| Shape | Round |
| Color | Silver |
| Usage/Application | Industrial |
| Material Standard | ASTM A182, ANSI B16.5, ASTM A351, ASTM A105 |
Preferred Buyer From
| Location | Worldwide |
Specifications:
- Flanges Dimensions: ANSI ASME B16.5 Spacer Flanges Dimensions
- ANSI ASME B16.5 Class 150 Spacer Flanges Dimensions
- ANSI ASME B16.5 Class 300 Spacer Flanges Dimensions
- ANSI ASME B16.5 Class 400 Spacer Flanges Dimensions
- ANSI ASME B16.5 Class 600 Spacer Flanges Dimensions
- ANSI ASME B16.5 Class 900 Spacer Flanges Dimensions
- ANSI ASME B16.5 Class 1500 Spacer Flanges Dimensions
- ANSI ASME B16.5 Class 2500 Spacer Flanges Dimensions
- Size :3/8″-120″ DN10-DN3000
| Business Type | Manufacturer, Exporter, Supplier |
| Material | Stainless Steel / Carbon Steel / Alloy Steel |
| Type | Weld Neck |
| Material Grade | S.S. 304 / 316 / 310 / 321 / 347 |
| material standard | ASTM A105, ASTM A182, ANSI B16.5, ASTM A351 |
| Brand Name | Shree Vinayak Metal & Tube |
| Diameter | 1/2 NB – 72 NB (Inch) |
Preferred Buyer From
| Location | Worldwide |
| Business Type | Manufacturer, Exporter, Supplier |
| Material | Steel |
| Diameter (Nominal) | #4 |
| Thread Pitch | 40 |
| Product Class | Internally Threaded Fasteners |
| Order | Specialty Nuts |
| Form and Design | Type “A”, Cold Formed, Full Body |
| Drive Style | Thumb Drive |
| Thread Length | Full Thread |
| Thread Direction | Right-Hand Thread |
| Coating | Zinc Plated |
| Coating Color | Clear |
Preferred Buyer From
| Location | Worldwide |
| Pages: 1 2 | Next » |